Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Brentwood?
Garage door installation in Brentwood typically costs $700 to $2,200 for a new door, including the panels, hardware, and the labor to hang and balance it. That range covers most single-car doors; a double-car door or one with insulated panels and windows tends to land near the top of it. The written estimate sets the final price, so treat the ranges below as what the work usually runs before we’ve measured your opening.
We’re Brentwood Garage Door Repair Co, and the reason we publish actual numbers is that most homeowners call after weeks of guessing. If your opener is fine but the door itself is done, this is a replacement call. If you’re not sure whether you need a new door or a repair, say so when you call and we’ll tell you straight. Call (855) 337-1178 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A typical new garage door installation in Brentwood runs $700 – $2,200.
- The door itself is most of the cost; labor is the smaller share.
- Insulated doors and windows push the price toward the top of the range.
- A professional licensed and insured local pro does the work, and the written estimate sets the final price.
- Call (855) 337-1178. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Garage Door Installation Cost Breakdown (2026)
Here’s how the work usually breaks down for a standard single-car door in Brentwood. These are typical estimated ranges, not quotes. The final price comes from the written estimate after we see the opening, the ceiling clearance, and the door you choose.
| Line item | Typical estimated range |
|---|---|
| New door installation (single-car, standard) | $700 – $2,200 |
| Opener installation (separate, if you’re adding one) | $250 – $550 |
| Panel replacement (if only one section is damaged) | $250 – $500 |
| Spring repair (one spring; a matched pair is about twice this) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| General garage door repair | $150 – $600 |
What drives the number up or down? The door is the biggest variable. A basic steel door in a standard color sits at the low end. An insulated door, a carriage-house style with windows, or a custom width adds to the cost. Spring and cable work is often bundled in when a new door is hung, so it’s worth asking whether that’s already included in your estimate. If you already have a working opener on a recognized brand, it may carry over to the new door; if not, we’ll quote an opener install separately. That’s why garage door installation here always starts with a look at what you already have.
What Affects Garage Door Installation Pricing in Brentwood
Brentwood is a town of mostly single-family homes built mainly from the 1950s through the 1980s, with a lot of detached garages. That shapes what installation actually looks like here more than a generic price guide would admit. Here’s what moves the price on a typical Brentwood job.
- Door size and type. A single-car door is the baseline. A double-car opening, a door with windows, or an insulated panel door costs more. Insulated doors are worth the extra in a Brentwood winter because they hold heat better, but they’re not free.
- Your existing opener. If your opener is a LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, or Raynor unit in good working order, it can often pair with a new door. If it’s tired or the wrong size for a heavier door, an opener install lands in the $250 – $550 range on top of the door price.
- The condition of the opening. Old detached garages in Brentwood sometimes have framing or header issues that need addressing before a new door goes up. If the opening is out of square, that’s real work before the door is even on the truck.
- Ceiling clearance and headroom. A low-clearance setup needs a low-clearance track and spring system, which is a different kit. It’s not a dealbreaker, but it affects what we bring and what the job costs.
- Gauge of steel and finish. Thin steel doors are cheaper up front but show dents faster. A heavier gauge or a wood-look finish costs more now and holds up to Brentwood’s freeze-thaw cycles better over time.
- Whether you’re also replacing the opener or spring system. If we’re already there, bundling a spring repair ($180 – $340 for one spring) or a new opener into the same visit is cheaper than two separate calls, and you’ll get a single written estimate for the whole job.
How to Save on Garage Door Installation
There’s no secret coupon code. The savings come from making fewer decisions under pressure and asking the right questions up front. Here’s what actually helps.
- Repair before you replace. A single dented panel, a door that’s jumped its track, or a set of worn rollers doesn’t need a whole new door. Panel replacement runs $250 – $500 and roller replacement $110 – $220. If a repair will get you another few years, take it.
- Get a written estimate first. A free estimate means you know the number before any work starts. Call (855) 337-1178 and we’ll come out, measure, and put it in writing.
- Have your opener model handy. Knowing whether you have a LiftMaster or a Chamberlain before we arrive means we can tell you whether it’ll pair with a new door without a second trip.
- Combine the job. If you’re replacing the door and the springs are old, replacing them at the same time costs less than doing it six months later.
- Keep your old door’s hardware clean and lubricated. Rollers ($110 – $220 to replace) and tracks last longer with a little attention, and a door that runs smoothly lasts longer than one that’s been grinding along for a decade.
The estimate is free and there’s no obligation, so the lowest-risk move on a big purchase is just getting the number. Call (855) 337-1178. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Garage Door Installation Cost
What’s the typical cost of a new garage door in Brentwood?
A new garage door installation in Brentwood typically costs $700 – $2,200, and that range includes the door and the labor to hang and balance it. Insulated doors and doors with windows land near the top. The written estimate sets the final price. Call (855) 337-1178 for an exact quote, free of charge.
Is it cheaper to repair or replace my garage door?
Repair is usually cheaper when the issue is a single component. Panel replacement runs $250 – $500, spring repair $180 – $340 for one spring, and track realignment $120 – $240. Replacement makes more sense when the door itself is structurally failing or several major components are failing at once. Call (855) 337-1178 and we’ll tell you which way the math goes for your door.
How much does opener installation cost in Brentwood?
Opener installation typically costs $250 – $550, or $120 – $320 if you’re repairing an existing opener rather than replacing it. It’s cheaper if it’s done at the same time as a new door. Call (855) 337-1178 for a written estimate that covers both.
Can you come today to look at my door?
Same-day service is available, and estimates are free. Call (855) 337-1178. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
What brands do you install and service?
We work on eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Most Brentwood homeowners already have one of these, so we can usually pair your existing opener with a new door or replace the whole system. Call (855) 337-1178 to confirm your model before we visit.
One Call, Every System
The reason we publish a full price table instead of a single “starting at” number is that door work isn’t one product. A door that won’t close, a spring that snapped on a cold morning, an opener that’s lost its range, or a door that’s simply reached the end of its life are four different jobs with four different price points. Sorting out which one you actually have is the first thing we do, and we’d rather fix what’s fixable than sell you a door you don’t need.
We’ve built our reputation around repair-first service and the eight brands that cover most of the market. That means when you call, we probably know your system. If the door has to be replaced, we handle that too, and you’ll get one written estimate for the whole job. Call (855) 337-1178 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Brentwood market as of 2026. Brentwood Garage Door Repair Co offers free estimates – call (855) 337-1178.
Written by the team at Brentwood Garage Door Repair Co.
What Our Customers Say
"Sent photos of everything before and after, which I needed for our HOA. Didn't have to ask twice."
- Sofia Vargas"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Raj Reddy"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Nathan Sutton